Choosing a Pneumatic Wrench for Your Projects
Pneumatic wrenches are mainly just screwdrivers on steroids. Air Compressor Tools in the simplest terms, pneumatic wrenches absorb downward force applied by compressed air and convert it into a twisting movement which is transferred to either a screwdriver bit or a socket mounted to the end of the wrench. These contraptions are handy for detaching any seized or rusted-in bolts and screws. These wrenches could also be employed to put in high-torque bolts which are usually used for moving machinery. Below are descriptions of three rather good pneumatic wrenches that a fella might want to take a look at.
Ingersoll Rand tools are considered to be properly made, top quality Airbrush Compressor devices. This long established company sells a rather sturdy pneumatic wrench that could produce 180 ft/lbs of torque. This wrench furthermore includes a built-in power regulator which does two important tasks. First, it will prevent you from tightening a bolt too far. Secondly, it can adjust the amount of torque when you are loosening a seized bolt, which might stop the bolt from breaking off inside the hole. This particular pneumatic wrench is fairly expensive at around $170, although this wrench can serve you efficiently for many years to come.
Chicago Pneumatic is one more widely respected manufacturer of these tools. This company also produces a pneumatic wrench which is worth considering. Their model # CP724H includes an oil bath clutch to deliver smooth rotations, while prolonging the life of this wrench. The integrated torque regulator ensures that each operation gets the correct amount of force and speed. This wrench even uses a plunger-fashion reverse valve for one-handed operation. At $160, Chicago Pneumatic’s wrench is nearly as high-priced as the Ingersoll-Rand wrench, and fortunately it is nearly as well made.
Northern Industrial makes a less expensive pneumatic wrench for lighter workloads and less expansive budgets. Their 3/8 inch drive wrench is able to produce a good amount of torque and offers the same standard functions as the two wrenches described above. The materials may not be the same quality, although for not quite $90, you’ll still receive your money’s worth with this sturdy little pneumatic wrench.
After you purchase your pneumatic wrench, you will need to get the correct-sized air compressor with at minimum a 10 gallon tank. These kinds of tools furthermore require special sockets and bits which are designed to withstand the high torque generated by this kind of wrench.
If you normally work on car or truck engines or heavy equipment you probably know about the value of a pneumatic wrench. You also are likely to understand that it is strongly recommended to buy the highest quality Airbrush Compressor Tools that you can finance.
